教你製做甜品提拉米蘇
關於提拉米甦的由來，有一個溫馨的故事：二戰時期，一提拉米蘇個意大利士兵要出征了，可是家裡已經什麼也沒有了，愛他的妻子為了給他準備乾糧，把家裡所有能吃的餅乾、麵包全做進了一個糕點裡，那個糕點就叫提拉米蘇。每當這個士兵在戰場上吃到提拉米蘇就會想起他的戚風蛋糕家，想起家中心愛的人。提拉米蘇，Ｔｉｒａｍｉｓｕ，在意大利文裡，有“帶我走”的含義，帶走的不只是美味，還有愛和幸福。
真正的提拉米蘇特點是軟綿綿，因為它的主要原料是軟芝士，這布蕾種芝士是專門用於製作甜品的，與做菜時用的生芝士不同；底部和中間必須有蛋糕，正宗的提拉米蘇是用手指餅；還有很濃的咖啡酒的味道，因為手指餅一定要浸透咖啡酒的味道；還必須月餅撒一層厚厚的可可粉。
材料（8寸）：
2.淡奶油（whipping crem) 200ML
3.細砂糖 50G
4.特濃咖啡（espress) 200G
5.marsala酒 100G
6.雞蛋 3個
7.手指餅乾 200G
8.可可粉 少許
9.塔塔粉 少許
工具：
電動打蛋器，橡太陽餅皮刮刀，8寸活動蛋糕模
作法：
1.將mascarpone打發，
2.蛋黃加25G砂糖打至呈乳黃色，與（1）芝士混和均勻，
3.淡奶油打至6分發，拌入蛋黃芝士糊（2）中，
4.蛋白加塔塔粉打至粗泡，再加25G砂糖打至硬性發泡。
5.將打好的蛋白拌入芝士糊（3）。
6.espress與marsala混和，
7.手指餅乾蘸上酒和咖啡混和液鋪在底部。
8.抹上一層芝士糊，再鋪第二層手指餅乾，最後以芝士糊“封頂”。
9.用保鮮膜包起來，放冰箱冷藏過夜。吃鳳梨酥的時間篩上可可粉 。
注：
1.marsala酒在市面上很難買到，可用白朗姆代替。
2.蘸咖啡酒時，不要把手指餅乾浸透，沾濕一面，然後將濕的那面提拉米蘇向上鋪在容器裡，沾太多酒液餅乾太濕會爛掉。或是將手指餅乾雙面用羊毛刷刷上酒液（用此可將咖啡的酒的份量減半，用不了那麼多，這方法適用於不喜歡酒味太重的人）。
3.Tiramisu放冰箱冷藏時間越長酒味很輕一些不會那麼嗆。
2011年4月24日星期日
Lubrication-free bearing material
Lubrication-free bearing material
Looking for free lubrication is extremely low coefficient of friction, but also has high strength and long life of wear-resistant materials in the process, the polymer material has attracted the attention of designers. In the mechanical manufacturing, the most interesting casting polyamide. This material has the advantage of particularly notable, because the addition of lubricant can make it a special sliding bearing materials.
In the design and use of sliding bearings, the friction and wear is the most important criteria for selection of material. In addition, such bearings are usually also consider the maintenance costs. So designers want to design a maintenance without bearings, with little or no maintenance costs. Over the years, a class of polyamide material is to be a popular choice material. Because of this material has the basic features and performance, making the manufacture of sliding bearings using it in the technology sector gained wide recognition.
Polyamide casting itself has many sliding bearing materials must possess properties. It has the impact toughness, low coefficient of friction and wear, good self-lubricating properties and dry running properties and high strength. On the whole, it has the best prerequisites for high-quality materials, and through the mixing of the lubricant can be added to further improve its performance. In this regard, the traditional MoS2 slide bearing and oil additives, but can also be used thermoplastic based reactive solid lubricants and other lubricating additives. Lubramid 600 T in the new products on the use of the latter. Mixed with the lubricant of these mix, sliding friction (sliding friction pairs) may, in its entire lifetime without maintenance, and no additional lubrication, even under normal conditions, even the installation of lubrication can also be no longer needed.
Lubricating effect of the active layer occurs immediately
Lubricant contained in the materials formed at the beginning stage of activity of a lubricating wear layer. The wear layer is passed to the match, usually a metal sliding surface, and because of its roughness and adhesion to the metal surface. Where it assumed the lubricant is usually supplied by an external task, but also filled the recesses of the rough metal surface. On the one hand, this further reduces the surface fill the wear and bearing wear, so to maintain lubrication; the other hand, the sliding surface in the contact pair to form a layer of plastic surface layer, thereby forming a from the perspective of a favorable bearing plastic / plastic material matching. It is clear that the lubricant materials, one of the greatest advantages. The traditional use of oil or grease lubrication, the lubricating film formed at the beginning of operation only. The Lubramid 600 T material active layer formed by lubricating immediately after starting the campaign to fully play a role. This would reduce the traditional lubrication methods and start operations in the starting stages of a very high degree of wear occurs. Another advantage is that the solid lubricant is used in delicate, evenly distributed throughout the material. Usually due to the movement of bearing journal in the overflow from the lubricant is separated from the material soon replaced by the lubricant. Matrix material and the lubricant completely uniform dispersion and blending operation to ensure the lubrication from the beginning to the last hour can be uniformly and stably maintained.
Material properties and the use of field
Lubramid 600 T by adding the lubricant and the composition of a focus on the sliding performance of precise and careful selection, and the material of the sliding friction coefficient of 0.15μ a particularly low value. In this way, and no additives PA 6G or add oil Oilamid materials compared, Lubramid 600 T of the abrasion and wear resistance are much better. In addition, a negative tendency to stick-slip effects are reduced to a minimum.
Additives and lubricants in Lubramid 600 T uniformly distributed material to self-lubricating effect and sliding performance can be sustained throughout life and even during the period remained steady. In addition, basic materials, PA 6G has excellent wear resistance, and has good machinability. So far all of the cast polyamide with standard manufacturing requirements of high sliding and wear resistance of components can now be used Lubramid material. This allows a longer life, less wear and lower costs.
Versatile material
If the lubrication of some parts is very difficult, impossible or not satisfactory, then has a good overall performance Lubramid is the most suitable material. If you want to achieve the PE 1000's sliding performance, and requires a good wear resistance and high mechanical strength, then Lubramid also the most suitable material. The main application areas are machinery and equipment manufacturing, automotive manufacturing and the crane driver and transportation technology. This material can be used as base material for the manufacture of bearing bushes, cam guide device, sliding and guide plate, pulley, gear or sprocket. In the other needs a good performance sliding and friction applications, this material is an alternative material. Provided in accordance with user requirements can be gray Lubramid 600 T material structure or plate, rod, tube and cutting the semi-rough. Can also provide on request the red, green, and with the FDA (U.S. Food and Drug Administration) approved the natural green of the material.
Looking for free lubrication is extremely low coefficient of friction, but also has high strength and long life of wear-resistant materials in the process, the polymer material has attracted the attention of designers. In the mechanical manufacturing, the most interesting casting polyamide. This material has the advantage of particularly notable, because the addition of lubricant can make it a special sliding bearing materials.
In the design and use of sliding bearings, the friction and wear is the most important criteria for selection of material. In addition, such bearings are usually also consider the maintenance costs. So designers want to design a maintenance without bearings, with little or no maintenance costs. Over the years, a class of polyamide material is to be a popular choice material. Because of this material has the basic features and performance, making the manufacture of sliding bearings using it in the technology sector gained wide recognition.
Polyamide casting itself has many sliding bearing materials must possess properties. It has the impact toughness, low coefficient of friction and wear, good self-lubricating properties and dry running properties and high strength. On the whole, it has the best prerequisites for high-quality materials, and through the mixing of the lubricant can be added to further improve its performance. In this regard, the traditional MoS2 slide bearing and oil additives, but can also be used thermoplastic based reactive solid lubricants and other lubricating additives. Lubramid 600 T in the new products on the use of the latter. Mixed with the lubricant of these mix, sliding friction (sliding friction pairs) may, in its entire lifetime without maintenance, and no additional lubrication, even under normal conditions, even the installation of lubrication can also be no longer needed.
Lubricating effect of the active layer occurs immediately
Lubricant contained in the materials formed at the beginning stage of activity of a lubricating wear layer. The wear layer is passed to the match, usually a metal sliding surface, and because of its roughness and adhesion to the metal surface. Where it assumed the lubricant is usually supplied by an external task, but also filled the recesses of the rough metal surface. On the one hand, this further reduces the surface fill the wear and bearing wear, so to maintain lubrication; the other hand, the sliding surface in the contact pair to form a layer of plastic surface layer, thereby forming a from the perspective of a favorable bearing plastic / plastic material matching. It is clear that the lubricant materials, one of the greatest advantages. The traditional use of oil or grease lubrication, the lubricating film formed at the beginning of operation only. The Lubramid 600 T material active layer formed by lubricating immediately after starting the campaign to fully play a role. This would reduce the traditional lubrication methods and start operations in the starting stages of a very high degree of wear occurs. Another advantage is that the solid lubricant is used in delicate, evenly distributed throughout the material. Usually due to the movement of bearing journal in the overflow from the lubricant is separated from the material soon replaced by the lubricant. Matrix material and the lubricant completely uniform dispersion and blending operation to ensure the lubrication from the beginning to the last hour can be uniformly and stably maintained.
Material properties and the use of field
Lubramid 600 T by adding the lubricant and the composition of a focus on the sliding performance of precise and careful selection, and the material of the sliding friction coefficient of 0.15μ a particularly low value. In this way, and no additives PA 6G or add oil Oilamid materials compared, Lubramid 600 T of the abrasion and wear resistance are much better. In addition, a negative tendency to stick-slip effects are reduced to a minimum.
Additives and lubricants in Lubramid 600 T uniformly distributed material to self-lubricating effect and sliding performance can be sustained throughout life and even during the period remained steady. In addition, basic materials, PA 6G has excellent wear resistance, and has good machinability. So far all of the cast polyamide with standard manufacturing requirements of high sliding and wear resistance of components can now be used Lubramid material. This allows a longer life, less wear and lower costs.
Versatile material
If the lubrication of some parts is very difficult, impossible or not satisfactory, then has a good overall performance Lubramid is the most suitable material. If you want to achieve the PE 1000's sliding performance, and requires a good wear resistance and high mechanical strength, then Lubramid also the most suitable material. The main application areas are machinery and equipment manufacturing, automotive manufacturing and the crane driver and transportation technology. This material can be used as base material for the manufacture of bearing bushes, cam guide device, sliding and guide plate, pulley, gear or sprocket. In the other needs a good performance sliding and friction applications, this material is an alternative material. Provided in accordance with user requirements can be gray Lubramid 600 T material structure or plate, rod, tube and cutting the semi-rough. Can also provide on request the red, green, and with the FDA (U.S. Food and Drug Administration) approved the natural green of the material.
襪子種類介紹
襪子種類介紹
現在襪子的種類很多，按襪統的長度分，有長統襪、中統襪和短統襪；按襪口種類分，有戶口襪、羅口襪和橡口襪；按使用對象分，有男襪、女襪和童襪。圓襪由襪口、襪統和襪腳3部分組織。其中襪腳包括襪跟、襪底和襪背、襪頭。襪口的作用是使除臭襪子邊緣不致脫散並緊貼腿上。
除臭襪的主要參數有5個：襪號、襪底長、總長、口長和跟高。防臭襪的規格是用襪號表示的，
出現三種情況襪子就該淘汰
1.失去彈性
襪子失去彈性，就會加大與雙腳的摩擦，走路或運動時不跟腳，如果出汗，還會有滑膩的感覺，很容易受傷。
2.腳後跟變薄，有破洞
襪子穿久了必然會變薄，這也會導致腳跟受傷或起泡。
3.穿上不舒服
雙腳有緊繃、刺癢，明顯勒痕等不適感時，說明襪子不合適。
如何買到合適的襪子？
別看襪子小，但想要買一雙合適的也不容易。
而襪號又是以襪底的實際長度尺寸為標準的，所以知道自己的腳長後便可選購合腳的竹炭襪。
可是，由於腳臭剋星所使用的原料不同，其在襪號系列上也有所不同。其中彈力尼龍襪，斯傑利以襪底長相差2cm為1檔；棉紗線襪、錦綸絲襪、混紡襪等的襪號系列，S+Z則以相差1cm為1檔。
現在襪子的種類很多，按襪統的長度分，有長統襪、中統襪和短統襪；按襪口種類分，有戶口襪、羅口襪和橡口襪；按使用對象分，有男襪、女襪和童襪。圓襪由襪口、襪統和襪腳3部分組織。其中襪腳包括襪跟、襪底和襪背、襪頭。襪口的作用是使除臭襪子邊緣不致脫散並緊貼腿上。
除臭襪的主要參數有5個：襪號、襪底長、總長、口長和跟高。防臭襪的規格是用襪號表示的，
出現三種情況襪子就該淘汰
1.失去彈性
襪子失去彈性，就會加大與雙腳的摩擦，走路或運動時不跟腳，如果出汗，還會有滑膩的感覺，很容易受傷。
2.腳後跟變薄，有破洞
襪子穿久了必然會變薄，這也會導致腳跟受傷或起泡。
3.穿上不舒服
雙腳有緊繃、刺癢，明顯勒痕等不適感時，說明襪子不合適。
如何買到合適的襪子？
別看襪子小，但想要買一雙合適的也不容易。
而襪號又是以襪底的實際長度尺寸為標準的，所以知道自己的腳長後便可選購合腳的竹炭襪。
可是，由於腳臭剋星所使用的原料不同，其在襪號系列上也有所不同。其中彈力尼龍襪，斯傑利以襪底長相差2cm為1檔；棉紗線襪、錦綸絲襪、混紡襪等的襪號系列，S+Z則以相差1cm為1檔。
HP碳粉匣可能故障原因
HP碳粉匣可能故障原因
（1）使用了不符合標準打印紙；（2）碳粉匣宅配型號與機子型不相配或粉碳受潮；
（3）感光鼓受潮；（4）掃描組件中有部件鬆動；（5）掃描電機運轉不平穩，有抖動現象。
檢修方法：
（1）這種故障有可能是由於紙張質量低劣引起的，因此，可先換上其他質量較好的打印紙重新打印。如果現象消失，則說明使用的打印紙不適合激光打印使用。當打印紙表面雜質過多或打印紙受潮後紙體絕緣電陰過小，這樣的紙張轉印時由於靜電荷包的邊際作用，圖像碳粉匣移動造成全幅圖像發虛。由於靜電原因造成輸出文字發虛或在文字外圍有一虛框等故障，在使用薄膜打印時經常見到，尤其是用如佳能BXII、惠普4VC等機型時，這種故障更為明顯，基本上無法使用。這主要是由於薄膜在貯運、使用等過程中會產生大量的靜電，而帶著大量靜電的薄膜當與感光鼓接觸轉印時，這些靜電會排斥粉碳，使粉碳較厚的地方的部分墨分往字體的邊緣移動，而整個薄膜在轉印電極的作用下又會緊貼於感光鼓，因些就產生了字體邊緣有一圈淡淡的粉碳故障，無法使用。這種故障一般解決辦法是將薄膜消除靜電而後使用但有些機型如惠普6L、惠普1000等卻沒有這種故障，可以正常使用。
（2）粉碳型號不匹配或受潮，也是造成輸出字體發虛的一個重要原因。激光打印機使用的都是單組分HP碳粉匣。所謂單組分有兩種：一種是純碳粉，另一種是碳粉匣內已經摻合了一定量的載體。不同機型使用的粉碳不同，使用載體含量也不同。如果使用了與該機不相配的碳粉，會使顯像後的圖文HP碳粉匣外溢，導致邊緣不勻，定影后圖像就會發虛。解決的辦法是更換與打印機對應的粉碳。並要注意在碳粉貯存使用中保持乾燥，不可受潮。
（3）打印機感光鼓表面的光導材料受潮時，光導率變差，曝光後的電位差就會很不均勻，顯像時EPSON碳粉匣無法正常吸附到感光鼓上，也會使圖像EPSON碳粉匣宅配分佈不均，造成圖像變淺或發虛。解決的辦法是用電吹風對感光鼓做乾燥處理，即可消除故障
（4）如果不是上述所列出的原因，則可能是掃描組件中的問題了。如果掃描組
件內透鏡的固定卡鬆動，打印機工作時產生的震動就會使透鏡也跟著抖動，就會造成聚焦不良，形成的點陣潛像發虛。解決的辦法是檢查組件內的部件固定卡是否鬆動，如果是則要重新固定牢靠。
（1）使用了不符合標準打印紙；（2）碳粉匣宅配型號與機子型不相配或粉碳受潮；
（3）感光鼓受潮；（4）掃描組件中有部件鬆動；（5）掃描電機運轉不平穩，有抖動現象。
檢修方法：
（1）這種故障有可能是由於紙張質量低劣引起的，因此，可先換上其他質量較好的打印紙重新打印。如果現象消失，則說明使用的打印紙不適合激光打印使用。當打印紙表面雜質過多或打印紙受潮後紙體絕緣電陰過小，這樣的紙張轉印時由於靜電荷包的邊際作用，圖像碳粉匣移動造成全幅圖像發虛。由於靜電原因造成輸出文字發虛或在文字外圍有一虛框等故障，在使用薄膜打印時經常見到，尤其是用如佳能BXII、惠普4VC等機型時，這種故障更為明顯，基本上無法使用。這主要是由於薄膜在貯運、使用等過程中會產生大量的靜電，而帶著大量靜電的薄膜當與感光鼓接觸轉印時，這些靜電會排斥粉碳，使粉碳較厚的地方的部分墨分往字體的邊緣移動，而整個薄膜在轉印電極的作用下又會緊貼於感光鼓，因些就產生了字體邊緣有一圈淡淡的粉碳故障，無法使用。這種故障一般解決辦法是將薄膜消除靜電而後使用但有些機型如惠普6L、惠普1000等卻沒有這種故障，可以正常使用。
（2）粉碳型號不匹配或受潮，也是造成輸出字體發虛的一個重要原因。激光打印機使用的都是單組分HP碳粉匣。所謂單組分有兩種：一種是純碳粉，另一種是碳粉匣內已經摻合了一定量的載體。不同機型使用的粉碳不同，使用載體含量也不同。如果使用了與該機不相配的碳粉，會使顯像後的圖文HP碳粉匣外溢，導致邊緣不勻，定影后圖像就會發虛。解決的辦法是更換與打印機對應的粉碳。並要注意在碳粉貯存使用中保持乾燥，不可受潮。
（3）打印機感光鼓表面的光導材料受潮時，光導率變差，曝光後的電位差就會很不均勻，顯像時EPSON碳粉匣無法正常吸附到感光鼓上，也會使圖像EPSON碳粉匣宅配分佈不均，造成圖像變淺或發虛。解決的辦法是用電吹風對感光鼓做乾燥處理，即可消除故障
（4）如果不是上述所列出的原因，則可能是掃描組件中的問題了。如果掃描組
件內透鏡的固定卡鬆動，打印機工作時產生的震動就會使透鏡也跟著抖動，就會造成聚焦不良，形成的點陣潛像發虛。解決的辦法是檢查組件內的部件固定卡是否鬆動，如果是則要重新固定牢靠。
2011年4月5日星期二
Bearing material properties and field of use
Bearing material properties and field of use
Lubramid 600 T by adding the lubricant and the composition of a focus on the sliding performance of precise and careful selection, and the material of the sliding friction coefficient of 0.15μ a particularly low value. In this way, and no additives PA 6G or add oil Oilamid materials compared, Lubramid 600 T of the abrasion and wear resistance are much better. In addition, adverse effects tend to stick-slip is also reduced to a minimum.
Additives and lubricants in Lubramid 600 T uniformly slide bearing distributed material to self-lubricating effect and sliding performance can be sustained throughout life and even during the period remained steady. In addition, basic materials, PA 6G has excellent wear resistance, and has good machinability. So far all of the cast polyamide with standard manufacturing requirements of high sliding and wear resistance of components can now be used Lubramid material. This allows a longer life, less wear and lower costs.
If the lubrication of some parts is very difficult, impossible or not satisfactory, then has a good overall performance Lubramid is the most suitable material. If you want to achieve the PE 1000's sliding performance, and requires a good wear resistance and high mechanical strength, then Lubramid is also the most suitable material. The main application areas are machinery and equipment manufacturing, automotive manufacturing and the crane driver and transportation technology. This material can be used as base material for the manufacture of bearing bushes, cam guide device, sliding and guide plate, pulley, gear or sprocket. In the other needs a good performance sliding and friction applications, this material is an alternative material. Provided in accordance with user requirements can be gray Lubramid 600 T material structure or plate, rod, tube and cutting the semi-rough. Can also provide on request the red, green, and with the FDA (U.S. Food and Drug Administration) approved the natural green of the material.
Lubramid 600 T by adding the lubricant and the composition of a focus on the sliding performance of precise and careful selection, and the material of the sliding friction coefficient of 0.15μ a particularly low value. In this way, and no additives PA 6G or add oil Oilamid materials compared, Lubramid 600 T of the abrasion and wear resistance are much better. In addition, adverse effects tend to stick-slip is also reduced to a minimum.
Additives and lubricants in Lubramid 600 T uniformly slide bearing distributed material to self-lubricating effect and sliding performance can be sustained throughout life and even during the period remained steady. In addition, basic materials, PA 6G has excellent wear resistance, and has good machinability. So far all of the cast polyamide with standard manufacturing requirements of high sliding and wear resistance of components can now be used Lubramid material. This allows a longer life, less wear and lower costs.
If the lubrication of some parts is very difficult, impossible or not satisfactory, then has a good overall performance Lubramid is the most suitable material. If you want to achieve the PE 1000's sliding performance, and requires a good wear resistance and high mechanical strength, then Lubramid is also the most suitable material. The main application areas are machinery and equipment manufacturing, automotive manufacturing and the crane driver and transportation technology. This material can be used as base material for the manufacture of bearing bushes, cam guide device, sliding and guide plate, pulley, gear or sprocket. In the other needs a good performance sliding and friction applications, this material is an alternative material. Provided in accordance with user requirements can be gray Lubramid 600 T material structure or plate, rod, tube and cutting the semi-rough. Can also provide on request the red, green, and with the FDA (U.S. Food and Drug Administration) approved the natural green of the material.
如何用白醋除腳臭，白醋偏方速去臭味
如何用白醋除腳臭，白醋偏方速去臭味
有腳臭的人，總怕別人說自己不講衛生，經常不腳臭洗腳。其實一天洗三次，腳依然是臭烘烘的，真是煩死人。經多次實踐證明，使用白醋除腳臭，可速去臭味，並能保證半月左右不再有臭味。
腳臭是由於腳心汗腺多，容易出汗，汗液裡除含水分，鹽臭腳分外，還含有乳酸及尿素。在多汗條件下，腳上的細菌大量繁殖並分解角質蛋白，再加上汗液中的尿素，乳酸，這樣就會發出一種臭味。若鞋子不透氣，空氣不流通，臭味就會越積越濃，臭氣異常腳臭剋星強烈。只有我們把致臭病菌殺死，才能有效除腳臭。
醋有很強的殺菌作用，對除腳臭十分有效。醋的主要成份是醋酸，還含有少量的氨基酸，有機酸，醣類，維生素 B1的，B2的等。使用白醋偏方速去臭味，同時能使除臭方法皮膚吸收到一些十分需要的營養素，起到鬆軟皮膚，增強皮膚活力的作用。
如何用白醋除腳臭：
白醋適量，若將患部浸泡於少許醋與四十度熱水除臭鞋墊的混合液中約十五分鐘熬開，涼下後泡腳，白醋量以漫過病灶為好，每日1 - 2次，每次半小時以上，連續一周以上，腳氣即愈。腳汗過多腳臭的人，每晚睡前洗腳時在水中放點醋，即可睡得舒適。
說明：
1，如果复而又出現臭味還可以重複上述方法，泡的時間則可相應減少。
2，泡過腳的醋可以反复使用，熬熬即可使用，醋少了添加即可。
3，初患者，腳氣症狀較輕，可使用。但出現水泡，皮損時最好不要用。
5，只是用醋，不加水。白醋，陳醋都可以健康襪，每次泡腳前熬熬效果最佳，不然稍稍遜色。
6，如果你用的洗腳盆或其它器皿耐火就可用此物熬醋，如果你用的洗腳器物不耐火，也會有很多辦法熬醋的。
7，洗腳時，將雙腳放在盆內溫水中泡兩三分鐘，待雙腳都熱了五指襪，用一隻腳的足跟壓在另一只腳趾縫稍後處，然後將腳跟向前推至趾尖處再回搓，回拉輕，前推重，以不搓傷皮膚為宜。
有腳臭的人，總怕別人說自己不講衛生，經常不腳臭洗腳。其實一天洗三次，腳依然是臭烘烘的，真是煩死人。經多次實踐證明，使用白醋除腳臭，可速去臭味，並能保證半月左右不再有臭味。
腳臭是由於腳心汗腺多，容易出汗，汗液裡除含水分，鹽臭腳分外，還含有乳酸及尿素。在多汗條件下，腳上的細菌大量繁殖並分解角質蛋白，再加上汗液中的尿素，乳酸，這樣就會發出一種臭味。若鞋子不透氣，空氣不流通，臭味就會越積越濃，臭氣異常腳臭剋星強烈。只有我們把致臭病菌殺死，才能有效除腳臭。
醋有很強的殺菌作用，對除腳臭十分有效。醋的主要成份是醋酸，還含有少量的氨基酸，有機酸，醣類，維生素 B1的，B2的等。使用白醋偏方速去臭味，同時能使除臭方法皮膚吸收到一些十分需要的營養素，起到鬆軟皮膚，增強皮膚活力的作用。
如何用白醋除腳臭：
白醋適量，若將患部浸泡於少許醋與四十度熱水除臭鞋墊的混合液中約十五分鐘熬開，涼下後泡腳，白醋量以漫過病灶為好，每日1 - 2次，每次半小時以上，連續一周以上，腳氣即愈。腳汗過多腳臭的人，每晚睡前洗腳時在水中放點醋，即可睡得舒適。
說明：
1，如果复而又出現臭味還可以重複上述方法，泡的時間則可相應減少。
2，泡過腳的醋可以反复使用，熬熬即可使用，醋少了添加即可。
3，初患者，腳氣症狀較輕，可使用。但出現水泡，皮損時最好不要用。
5，只是用醋，不加水。白醋，陳醋都可以健康襪，每次泡腳前熬熬效果最佳，不然稍稍遜色。
6，如果你用的洗腳盆或其它器皿耐火就可用此物熬醋，如果你用的洗腳器物不耐火，也會有很多辦法熬醋的。
7，洗腳時，將雙腳放在盆內溫水中泡兩三分鐘，待雙腳都熱了五指襪，用一隻腳的足跟壓在另一只腳趾縫稍後處，然後將腳跟向前推至趾尖處再回搓，回拉輕，前推重，以不搓傷皮膚為宜。
襪子小知識
襪子小知識
絕對不符合著裝禮儀,又土又 out。因為白襪子和淺顏色的純棉襪子只適合運動休閒時穿。如果你沒有穿運動鞋!請不要用白色除臭襪子搭配你的任何顏色的皮鞋!
皮鞋勿配白襪日常生活中常見的一個錯誤是：一位男士坐著的時候，從西褲與皮鞋之間露出來一截雪白的棉襪，這種不和諧是由正裝和休閒襪搭配混亂造成的，絕對不符合著裝禮儀，又土又OUT。因為白襪子和淺顏色的純棉除臭襪只適合運動休閒時穿。如果你沒有穿運動鞋！請不要用白色襪子搭配你的任何顏色的皮鞋！
男襪搭配有道男襪的顏色應該是基本的中性色，並且比長褲的顏色深。男襪的顏色與西裝相配是最時髦也最簡單的穿法，如果西裝是灰色的，可以選擇灰色的防臭襪，淺色西裝配較深的茶色或棕色襪子。白色和淺色的純棉襪該用來配休閒風格的衣褲和便鞋。
穿西裝短褲時，太長的竹炭襪顯得土氣，要穿長度在小腿肚以下的短襪，最好是剛剛到腳踝的短款襪子。而且盡量挑不醒目的淺顏色。若做純白的運動打扮，腳臭剋星一定要是纖塵不染的白色運動襪。
確保襪子的長度使你不至於在坐下時，或是一條腿搭在另一條腿上時露出腿部的皮膚。
斯傑利多久換一次比較好正常情況下，專家建議一雙襪子不要連續穿著超過3 天。條件允許的情況下，建議您每天更換，保持腳部的干燥，不但可以有效的避免腳部疾病的產生，還有助於延長S+Z的壽命。
一雙襪子的壽命在3 個月左右，超過3 個月的襪子，即使沒有破掉，也建議您不要再穿了。長期穿著的襪子上面會滋生一些細菌，僅僅靠普通的洗滌是沒有辦法完全去除的。
為什麼全棉襪子棉含量不是100%因為棉花是柔軟而舒適的天然纖維，其實市面上幾乎沒有100%棉的襪子，因為100%棉的襪子沒韌性，不禁穿，市場上一般含棉量在85 %以上的就是傳統說的純棉的了，這個具體的沒有定數，只是一般而言。純棉的襪子（市面上所說的純棉）穿起來柔軟舒適，透氣性和排汗性都不錯，性價比較高。
絕對不符合著裝禮儀,又土又 out。因為白襪子和淺顏色的純棉襪子只適合運動休閒時穿。如果你沒有穿運動鞋!請不要用白色除臭襪子搭配你的任何顏色的皮鞋!
皮鞋勿配白襪日常生活中常見的一個錯誤是：一位男士坐著的時候，從西褲與皮鞋之間露出來一截雪白的棉襪，這種不和諧是由正裝和休閒襪搭配混亂造成的，絕對不符合著裝禮儀，又土又OUT。因為白襪子和淺顏色的純棉除臭襪只適合運動休閒時穿。如果你沒有穿運動鞋！請不要用白色襪子搭配你的任何顏色的皮鞋！
男襪搭配有道男襪的顏色應該是基本的中性色，並且比長褲的顏色深。男襪的顏色與西裝相配是最時髦也最簡單的穿法，如果西裝是灰色的，可以選擇灰色的防臭襪，淺色西裝配較深的茶色或棕色襪子。白色和淺色的純棉襪該用來配休閒風格的衣褲和便鞋。
穿西裝短褲時，太長的竹炭襪顯得土氣，要穿長度在小腿肚以下的短襪，最好是剛剛到腳踝的短款襪子。而且盡量挑不醒目的淺顏色。若做純白的運動打扮，腳臭剋星一定要是纖塵不染的白色運動襪。
確保襪子的長度使你不至於在坐下時，或是一條腿搭在另一條腿上時露出腿部的皮膚。
斯傑利多久換一次比較好正常情況下，專家建議一雙襪子不要連續穿著超過3 天。條件允許的情況下，建議您每天更換，保持腳部的干燥，不但可以有效的避免腳部疾病的產生，還有助於延長S+Z的壽命。
一雙襪子的壽命在3 個月左右，超過3 個月的襪子，即使沒有破掉，也建議您不要再穿了。長期穿著的襪子上面會滋生一些細菌，僅僅靠普通的洗滌是沒有辦法完全去除的。
為什麼全棉襪子棉含量不是100%因為棉花是柔軟而舒適的天然纖維，其實市面上幾乎沒有100%棉的襪子，因為100%棉的襪子沒韌性，不禁穿，市場上一般含棉量在85 %以上的就是傳統說的純棉的了，這個具體的沒有定數，只是一般而言。純棉的襪子（市面上所說的純棉）穿起來柔軟舒適，透氣性和排汗性都不錯，性價比較高。
订阅：
博文 (Atom)